To add hatching
-
From the Parametric Frame Builder’s Action list box, select Add Hatch.
-
Enter the ID number of the frame section to hatch in the ID field.
-
Key in the distance between the hatching lines in the Delta field.
-
Key in the angle of the hatching lines in the Angle field.
-
(Optional) Turn on Outline if want to add a shape on the perimeter of the hatching.
-
(Optional) Turn on Threshold if want to add a threshold to the frame.
-
Key in a value in the Height field.
-
Key in a value in the Overhang (width increase on one side) field.
-
Click Build Command.
A command is generated in the Command list box.
-
(Optional) Click Update to execute the commands from the Command list box.
